PLA Filament, 3D4Makers
PLA Filament PLA Filament (Polylactic Acid) is a biodegradable polymer coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants. Due to a low shrinkage factor PLA will not deform after cooling, this makes the material ideal for 3D printing on FFF / FDM machines. Polylactic acid is a polyester that is built from several lactic acid units. It is colourless and transparent. PLA has a density of about 1.24 g/cc. The glass temperature is typically around 50 °C and it as a melting temperature between 80 and 150 °C. The decomposing temperature is roughly 250 °C. Polymers made of lactic acid are flammable. Great printability Biodegradable Food contact approved Printer settings Description Value Printer nozzle temperature 180 - 220°C Heated bed temperature 20 - 60°C Bed Adhesion Magigoo
PLA Filament
PLA Filament (Polylactic Acid) is a biodegradable polymer coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants. Due to a low shrinkage factor PLA will not deform after cooling, this makes the material ideal for 3D printing on FFF / FDM machines. Polylactic acid is a polyester that is built from several lactic acid units. It is colourless and transparent. PLA has a density of about 1.24 g/cc. The glass temperature is typically around 50 °C and it as a melting temperature between 80 and 150 °C. The decomposing temperature is roughly 250 °C. Polymers made of lactic acid are flammable.
Great printability
Biodegradable
Food contact approved
Printer settings
Description
Value
Printer nozzle temperature
180 - 220°C
Heated bed temperature
20 - 60°C
Bed Adhesion
Magigoo Original on glass or a PEI Sheet
Physical properties
Description
Value
Test method
Density
1,24 g/cc
ISO 1183
Tensile strength at yield
66 MPa
ISO 527
Tensile (E) modulus
3027 MPa
ISO 527
Impact strength - Charpy method 23˚C
3,4 kJ/m²
ISO 179
Moisture absorption
1968 ppm
ISO 62
Glass transition temp
57°C
ISO 11357
Measurements & Tolerance
Size
Diameter tolerance
Roundness
1,75 mm Filament
+/- 0,05mm
95%
2,85 mm Filament
+/- 0,10mm
95%
Additional info
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun.
When the 3D printer is not being used it is important to keep the 3D4MAKERS PLA Filament in a bag and stored in a cool (15-25˚C) and dry room away from UV light until it is used again.
PLA Filament, 3D4Makers
3D4Makers.com
The Polyimide (TPI) Z2 filament has now officially received the EN 455
PLA Filament, 3D4Makers, 3d pla
3D4Makers Filament PCL 100 1.75 mm - 3D Compare Materials
High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8
PLA Filament Collection
3D4Makers Blue ABS Filament 1.75 mm - 3D Compare Materials
3D-printed Tardis made with our 3D4Makers PLA Filament .com/products/pla-filament
eSUN eSILK PLA White 1.75mm 1Kg 3D Printing filament - 3D FilaPrint
3D4Makers.com